Monday, 30 May 2011

HID Conversion

First job of the summer was to replace the old HID head lights with a complete new kit before the MOT inspection. The drivers side head light was working intermittently and took a long time to fire up which suggested the ballast was on it's way out. I believe in doing a job once, so rather than hunting down a single ballast i replaced the full kit with this 5000k brilliant white set up from Helligkeit.

1) Remove Intake Scoop

1) Remove Intake Scoop
To access drivers side lights, remove 2 bolts on the slam panel and pull the scoop away from the wing

2) Remove battery

2) Remove battery
Always a good idea when playing with electrics, but also to gain access to the passenger side head light

3) Remove wire harness and bulbs

3) Remove wire harness and bulbs
Gently remove the bulb retainers, unplug everything on the harness and remove from the car.

Let There Be Light!

Let There Be Light!
The photo doesn't do it justice but they work a treat and passed the MOT - GOOD TIMES!